Thread: New project - Feedback for Brian Crower stage 3- 272* needed

Cams (BC0206), springs and retainers (BC0200) ordered.
Waiting for delivery.

Thanks to jagy - SR16VE pistons delivered.

Nice project, I have always wanted to put this setup together with a custom intake and exhuast header, 4cw crank.

any reason why you went 0206's over 0202's?
I thought that the S14 style cam didn't work in the FWD sr20de?

BC have both layouts - for VTC and non VTC head.
Engine is ready for ignition.
Current setup :
SR20DE high port engine
BC cams stage 3
adjustable cam gears
ВC springs and titanium retainers
SR16VE pistons
SR20DE 4-2-1 manifold with longer downpipe
63,5mm exhaust, decat
Full engine rebuild, ports clean up.
Exedy racing сlutch

Nice. Can't wait to see the finished product.

First run on 370cc injectors, no fine tuning :
https://vid.me/NyF1

I've the feeling we'll go maybe over the 200hp on the crank...

P.S. : it started on a 1/2 revolution from the starter, i'm amazed , it's probably because of the compression ratio.
We set the cams gear at +5/-5, because of the cam profile info,and currently running with 20* overlap, which I think is ok for the start :

Nice! I have this setup working on too but am going modified obx tri y, 3.5in intake, q45tb and 3in exhaust (decat).
Am watching this build. In for updates.

Sent from my LG-D850 using Tapatalk

You should look into custom headers and 3in exhaust. Let that beast breathe.

Sent from my LG-D850 using Tapatalk

Better get that thing on the dyno or use virtual dyno using that much overlap

and get that 3" exhaust pipe on there too!