Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Help with belt size?

+ Reply To Thread
Posts: 1-4 of 4
2013-10-21 02:07:45
#1
Help with belt size?
Alright just before anything I been looking and looking around to see the answer but nothing.

In a few weeks I'm going to be upgrading all my pulleys and I need to know which belts match up with this set up I'm using.

Crank=G Spec w/ spacer
Alt.,WP, PS=UR Pulleys

what would be the right belts to get with this set up and I'm also using A/C.

P.S.
If by any means if I missed a search result and someone can post the link would be also great.
2013-10-21 02:23:35
#2
cut the stock belt and loop it around. Make a mark where it overlaps and measure. Now go to the parts store and see what the closest they have is and try that. If it doesnt fit take it back and get the next size in which ever direction you need. There are so many pulley combinations that it would be quite a task to document them all.
2013-10-21 02:27:21
#3
Originally Posted by squirlz
cut the stock belt and loop it around. Make a mark where it overlaps and measure. Now go to the parts store and see what the closest they have is and try that. If it doesnt fit take it back and get the next size in which ever direction you need. There are so many pulley combinations that it would be quite a task to document them all.


This is what i would do

however i would just do the belts in the auto parts store parking lot to save the trips, its probally going to be a trial and error type of thing
2013-10-21 02:34:36
#4
When i did mine i just bought a few of them and took back what did not work. But the car was not running at the time and the engine was on a stand.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top