Thread: BC Stage 3 272 Cams. Upgrading springs?

Do i HAVE to upgrade springs or can i drop these into my SR20DE Highport and drive it as it is. Just something to play with while i build the VET.

What are these worth Used? I have the option to buy a set but not sure if its cheap or not

You HAVE to upgrade the springs. No idea on a "used" price, as they are pretty cheap imo when new.

Bummer, even if i am only using the factory rev limits?

Yeah they're alot bigger than the stock units.

why do you wont such a big cam if you can only stay withen stock limits, 272dur 12mm of lift is a full race cam

Cause the is a set for sale locally for about $100, was going to use them to play with in the DE while the VET is being built

Get BC springs, around 75usd for a new set...

The springs are cheap just a pain in the ass to install. you need an air compressor to keep the valves from falling. maybe find a friend who has one and borrow it, and a hose that will go down into the cylinder. and that valve spring removal tool from Amazon, I think its like 30 bucks

Nah, too much hassle to do springs. Was hoping for a cheap set of drop in cams to play around with, but not to worry.

...........not to mention those suckers need degree'd to reap any sort of results (or better yet, to NOT lose power as a drop in set......................)