Thread: still having problems

that sounds awfulllllllll

tps isnt out of the picture but even with a bad tps you can rev the car

not the common maf problems

nothing to do with grounds.

Even if you left the knock sensor unplugged the car would be ok because after a certain point the ecu doesnt read it i believe

my car is obd2 but if thats correct i will unplug that pos tomorrow. im gettin so aggrivated with this its getting worse and worse

hammering on it a bunch while its not running right cant be helping though bud..

i havent been that video i went full throttle but i didnt stomp on it i progressed into the throttle.

ok so i found some old spark plug wires from my 95 g20 and decided to put them on my car and it actually ran better. so i ordered some new ngk plug wires. and my knock sensor will be here soon. thanks everyone for the help we are gettin close to figuren it out

cool mike

So did you get the ebay knock sensor? The sensor looks easy but they are usually very hard to break free. The best way is a swivel head and a 2ft extension as there is very little space to swing the ratchet and get good leverage to break the bolt up there. I have a feeling that thats your main issue, everything should fall into place afterwards.

no i bought the good one from rockauto i really dont like buyin cheap cheap shit for my car. if this stuff done fix it then im goi with a maf and iacv. then if that dont work ill go with a fuel pump. and if that dont work then well she is goin in timeout

on my car its really easy i just jack the car up crawl under neath and i can reach straight up to it no problem