Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Sr20 into a 04-06 1.8s base sentra

+ Reply To Thread
Posts: 21-26 of 26
2013-01-01 23:32:06
#21
Originally Posted by Supa1.8
Originally Posted by wishiwasfast
Dude install a de first then once thats running perfect with no issues. Then swap the ve short block/ecu. The sr swap in a b15 is rough..... especially with a 04-06.


Well this dude on B15u done a sr swap in his 04-06 sentra and the only issue he had was the sr ecu wouldnt let him operate the windows, dome lights, and locks. But now he done alil changes and now every thing workin fine now. The only thing he did is buy the motor, tranny, ecu, and the motor/tranny mounts off the origina sr20 car and swap that over to his. So thats what I might have to do, butttt Im goin to do an complete over haul on it. Clean it, PnP, and etc.


That was me......... .. . . Anyways. The dome lights worked btw.

I bought a 01 se sentra. Swapped everything but the rear door harnesses. I had to swap the front chassis, engine, dash, front door, rear body harnesses to get everything to work. So it is rough.

The only thing not working is the A/C. It has me stumped.
2013-01-06 02:55:47
#22
Originally Posted by wishiwasfast
Originally Posted by Supa1.8
Originally Posted by wishiwasfast
Dude install a de first then once thats running perfect with no issues. Then swap the ve short block/ecu. The sr swap in a b15 is rough..... especially with a 04-06.


Well this dude on B15u done a sr swap in his 04-06 sentra and the only issue he had was the sr ecu wouldnt let him operate the windows, dome lights, and locks. But now he done alil changes and now every thing workin fine now. The only thing he did is buy the motor, tranny, ecu, and the motor/tranny mounts off the origina sr20 car and swap that over to his. So thats what I might have to do, butttt Im goin to do an complete over haul on it. Clean it, PnP, and etc.


That was me......... .. . . Anyways. The dome lights worked btw.

I bought a 01 se sentra. Swapped everything but the rear door harnesses. I had to swap the front chassis, engine, dash, front door, rear body harnesses to get everything to work. So it is rough.

The only thing not working is the A/C. It has me stumped.


Wow man i though u had to swap out the motor,tranny, and ecu. But i see that u had to do alil more than what i had thought of. I already know i have to swap out the ecu/tranny/motor/axels/harnesses/cross member as well. Im still doing some lookin up on this swap but i have some one whose real educated on all types of swaps, power add ons, turbo and etc. So Im goin to need everyones help on here as well. Cause one person cant do it all on themseleves.
2013-01-27 02:10:25
#23
The crossmember is the same with the same motor mounts (thats why you can use sr20 mmi in a qg18). Also, the if you have an auto 1.8, the driver axle will work if your using a non-lsd sr20 5-spd.
2013-02-08 01:45:16
#24
Any updates?
2016-03-17 03:07:01
#25
Sr20 into a 04-06 1.8s base sentra
You manage to get the bracket at the passenger side?


Sent from my iPhone using Tapatalk
2016-12-31 03:21:44
#26
I wouldn't bother with an SR20 swap unless it was boosted.

My advice sell the 1.8 and go buy yourself a B15 SE-R Spec V. The aftermarket for the QR has become pretty good.

A non boosted SR20 will not be that impressive on the heavier B15. I think there are turbo kits out there too for the QR25.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top