The engine was built per Mike Kojimas budget build thread. I'll try to summarize mods.
Intake:
Aem intake, N60 MAF, stock TB, port matched JDM intake manifold
Engine Bottom End:
SR16 pistons(swain coated tops and skirts)eagle rods,stock crank, DE block, piston oil squirters, custom windage tray and crank scraper, acl bearings, GTIR mains, VE oil pump.
Head:
lightly hand ported and port matched, C3 cams, Ti springs and retainers, sodium filled exhaust valves, adjustable cam gears (set 0,0 for now)
WPC treatment applied to most moving parts( i.e. cams, all bearings, rockers, oil pump gear)
Exhaust:
Hotshot Gen VI with 3in collector, magnaflow muffler, turndown dump
Engine Ext:Ur crank pulley, Gspec WP pulley
Fuel: Nismo FPR (3 bar), JWT fuel rail, 50lbs injectors, walbro 255, 100 octane
ECU: Jim Wolf tuned ECU (brought the car to JWT and they custom tuned)
Cost: cost for just the engine build was approximately $4K
Just ask if I forgot to cover some component of interest.
Last edited by Visco
on 2012-10-09
at 03-13-23.