Thread: ebay header?

http://cgi.ebay.com/ebaymotors/SER-2-0L-Stainless-Steel-Header-91-99-200SX-Sentra-G20_W0QQitemZ250233844556QQcmdZViewItem?hash=item250233844556

what about this? It looks like 2.5" on photos, but there is written a 2.25" in the text.

if its written to be 2.25 then why would you even bother guessing at how big it is in the pic?(most of the times ppl on ebay don't post pics of the actual item you are receiving there for they may use a pic of a header which isn't even for your car but the description will show what header is really being sold......

the guy could have put a pic of a header for a bmw but asl ong as the description says what header is being sold then thats all that matters.

hm, ok..

Anybody know which are really 2.5"??

If you would read what I posted and what others have in this thread you would know that question right? It has been covered already. IF your not sure then that is the chance you will have to take.

This is the one I bought too, except with a cool black finish lol.

Another question here, what gaskets should i use? The ones that come with it?

They will last you if you tighten everything all the way and never take them off.

If you don't tighten the bolts well enough, it will leak and split the gasket in half.

My used SSAC header came with the gaskets split in half...

I only could get a gasket for the block but not for the DP and Cat, so i used the bad ones, but on the rest of the exhaust I made my own. Just go to Autozone and get a sheet of gasket material for $15 and make as many as you wish

Didn't have any probs with the manifold gasket, blew out the secondary within short time - probably because it got a little loose. Those metal/carbon/metal sandwich gaskets won't take any heat if they're not really snug, they just blow out the inner part of the sandwich.

The copper one I had fab'd is holding up well, no leaks.

you can get the copper one from Summit

since im bored and ive been putting this off for awhile, how does this one look:

http://cgi.ebay.com/ebaymotors/91-99-92-93-94-NISSAN-SENTRA-2-0L-SER-STAINLESS-HEADER_W0QQcmdZViewItemQQ_trkparmsZ39Q3a1Q7c66Q3a2Q7c65Q3a15Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem160281860843QQitemZ160281860843

the welds look nice, it is basically the same design or? i think imma pick this one up with a copper gasket from summit.

anyone have the link handy?