Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Oil Pressure

+ Reply To Thread
Posts: 1-6 of 6
2011-04-02 18:20:36
#1
Oil Pressure
can someone that knows this info please inform me of what a sr20de motor high port oil pressure should be at cold start and warm idle please. Thanks

10w 30 if that helps
2011-04-02 19:06:01
#2
38-43 psi @ idle

peace
2011-04-02 21:55:46
#3
Originally Posted by niZmo
38-43 psi @ idle

peace



Sounds more like fuel pressure, which would be 38psi at idle, 43 with the vacuum pipe disconnected.

For OIL ...

I'd often see 50-60psi at cold (straight after startup).

Normal warm idle would be ~15psi with 5W30.
2011-04-02 23:41:45
#4
I am running a 5w40 and I see about 30psi idle after beating on it. 25psi is as low as I have seen it on my engine. I idle around 1000rpm also. But I don't have an oil cooler. When i first start it cold, it is around 70-80psi iirc with a high idle of 1500rpm.
2011-04-03 02:07:30
#5
Originally Posted by Coheed
I am running a 5w40 and I see about 30psi idle after beating on it. 25psi is as low as I have seen it on my engine. I idle around 1000rpm also. But I don't have an oil cooler. When i first start it cold, it is around 70-80psi iirc with a high idle of 1500rpm.


For a VE or a RR those pressures are probably in spec, even higher at cold idle (i've seen a VE peg a 100psi oil gauge before, as well as a GTI-R), the OP was asking about a DE High port which has a far less capable pump and the service manual spec for warm idle pressure is way under 20psi.

I'm not saying that's a bad thing to have more pressure at idle, likely due to the weight of the oil perhaps, i've never really done any testing or anything like that, but i just stated the 'normal' spec.
2011-04-03 05:29:39
#6
Originally Posted by Cozzm0_AU
Sounds more like fuel pressure, which would be 38psi at idle, 43 with the vacuum pipe disconnected.

For OIL ...

I'd often see 50-60psi at cold (straight after startup).

Normal warm idle would be ~15psi with 5W30.


dam right!

my bad

when i had my sr 20de high port, i use to get 15 psi @ idle and about 80psi cold start.

it was boosted though

peace
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top