Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: We need a VQ35 swap kit for the B13/B14 and P11 chassis!!!

+ Reply To Thread
Posts: 361-370 of 407
2014-04-06 14:25:48
#361
Re: We need a VQ35 swap kit for the B13/B14 and P11 chassis!!!
Originally Posted by brownspeed
Ponda 3core radiator should do the job. So fab would be needed to used back the sock b13/14 but I suggest a bigger aftermarket ponda radiator

brown speed engineering


It's not a error that's what I call honda. Ponda I don't hate them just like to see them in my rear view mirror

brown speed engineering
2014-04-07 08:28:25
#362
One day I will do this...with forced induction. Hell yeah. Keep it up man
2014-04-07 14:12:00
#363
Great! I have a 00 Maxima VQ30DE-K with the variable runner manifold that's been sitting in my garage for a few years now. Now I just need to find a manual transmission and harness/ecu.

Do these mounts fit the VQ30 and VQ35, or just the VQ35 only?
Also, does the axle bracket work for 5-speed or 6-speed axles?
2014-04-07 14:52:35
#364
VQ30DE-K, FTMFW! @ny5speed
2014-04-07 15:21:01
#365
Yes it does but you will need a 6speed trans from a spec v or maxims. We where looking for a 5speed trans to see the difference but we couldn't get a hold of one

brown speed engineering
2014-04-07 15:21:51
#366
Re: We need a VQ35 swap kit for the B13/B14 and P11 chassis!!!
Originally Posted by NissanEgg
Great! I have a 00 Maxima VQ30DE-K with the variable runner manifold that's been sitting in my garage for a few years now. Now I just need to find a manual transmission and harness/ecu.

Do these mounts fit the VQ30 and VQ35, or just the VQ35 only?
Also, does the axle bracket work for 5-speed or 6-speed axles?


Originally Posted by brownspeed
Yes it does but you will need a 6speed trans from a spec v or maxims. We where looking for a 5speed trans to see the difference but we couldn't get a hold of one
@Nissanegg
brown speed engineering




brown speed engineering
2014-04-15 19:14:10
#367
Originally Posted by brownspeed
Originally Posted by NissanEgg
Great! I have a 00 Maxima VQ30DE-K with the variable runner manifold that's been sitting in my garage for a few years now. Now I just need to find a manual transmission and harness/ecu.

Do these mounts fit the VQ30 and VQ35, or just the VQ35 only?
Also, does the axle bracket work for 5-speed or 6-speed axles?


Originally Posted by brownspeed
Yes it does but you will need a 6speed trans from a spec v or maxims. We where looking for a 5speed trans to see the difference but we couldn't get a hold of one
@Nissanegg
brown speed engineering




brown speed engineering


You will need a 02-03 maxima bell housing to fit using a 02-06 spec v tranny right ? I believe nissan still offers these bell housings as well
2014-04-19 11:52:59
#368
Originally Posted by brownspeed
Originally Posted by 1fastser
I couldn't really make out much thru that 100 pixel video but I know you are already aware of this. Thanks for posting what you have so far.


Here is a better

Sent from my MB886 using Tapatalk


What insert is that for the driver side tranny mount??
2014-04-19 14:55:53
#369
You need the ga16 engine mount

brown speed engineering
2014-04-19 17:30:28
#370
Originally Posted by brownspeed
You need the ga16 engine mount

brown speed engineering


Ok well hopefully i can get these soon, because im almost finished with my maxima
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top