Thread: We need a VQ35 swap kit for the B13/B14 and P11 chassis!!!

I have an a32 with the vq35 swap and i will say that it would be a killer in a b frame car. My question is who is offering just the mounts because im going to use the vq30 timing components like i did for my maxima. I find this route to be easier and alot cheaper than trying to get with the full swap. Now what tranny are you guys using for this swap??

I would just say make your own mounts would be the easiest. For the driver side/trans mount you should be able to use the spec V tranny bracket with the mazworx mount for the 6 speed swap, for the passenger side I would say you could make the maxima/altima engine mount work that would mount on the frame rail or make some type of bracket off the frame rail pretty easily. And for the other two, they line up in a straight line by what looks like directly where the crossmember would be. Shouldnt be too hard to modify the b13/b15 crossmember to accept the altima/maxima front and rear engine mounts.

Thanks man, i wanted to do something different with b13/14. Ive had the det powered ones now its time to kill them all motor LOL

OK guys I know I been MIA the mounts or done I will be give you guys the price later today if my get a chance to go to the shop we only have 1 set finish for someone who is ready to do the swap asap so you can post pictures and give you're reviews on the mount brackets remember it bolts directly to the b13/b14 chassis same b13/14 mount will be used with the brackets so be sure to have polyurethane insert I will get a pic of brackets to you guys here. And we finished our b14 with the same mount kit we made

Sent from my MB886 using Tapatalk

Nice...well when its finish let me know

finally we have a price to work with, whats the price and could you say how quickly they'ld be available

Here is a link for the video on the vq b13/14 swap kit everyone pls view and comment. We Woking on the price I'll let you guys know has soon as possible .......

Sent from my MB886 using Tapatalk

Well i know i will be buying a set from you.

I will also set aside some funds for these mounts.

Hey guys

Sent from my MB886 using Tapatalk