Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: We need a VQ35 swap kit for the B13/B14 and P11 chassis!!!

+ Reply To Thread
Posts: 281-290 of 407
2014-01-28 16:17:45
#281
I have an a32 with the vq35 swap and i will say that it would be a killer in a b frame car. My question is who is offering just the mounts because im going to use the vq30 timing components like i did for my maxima. I find this route to be easier and alot cheaper than trying to get with the full swap. Now what tranny are you guys using for this swap??
Last edited by kenvq35 on 2014-01-28 at 16-25-46.
2014-01-29 02:54:24
#282
I would just say make your own mounts would be the easiest. For the driver side/trans mount you should be able to use the spec V tranny bracket with the mazworx mount for the 6 speed swap, for the passenger side I would say you could make the maxima/altima engine mount work that would mount on the frame rail or make some type of bracket off the frame rail pretty easily. And for the other two, they line up in a straight line by what looks like directly where the crossmember would be. Shouldnt be too hard to modify the b13/b15 crossmember to accept the altima/maxima front and rear engine mounts.
2014-01-29 03:11:47
#283
Thanks man, i wanted to do something different with b13/14. Ive had the det powered ones now its time to kill them all motor LOL
2014-01-31 14:56:56
#284
OK guys I know I been MIA the mounts or done I will be give you guys the price later today if my get a chance to go to the shop we only have 1 set finish for someone who is ready to do the swap asap so you can post pictures and give you're reviews on the mount brackets remember it bolts directly to the b13/b14 chassis same b13/14 mount will be used with the brackets so be sure to have polyurethane insert I will get a pic of brackets to you guys here. And we finished our b14 with the same mount kit we made

Sent from my MB886 using Tapatalk
2014-01-31 19:46:11
#285
Nice...well when its finish let me know
2014-02-03 17:16:08
#286
Originally Posted by brownspeed
OK guys I know I been MIA the mounts or done I will be give you guys the price later today if my get a chance to go to the shop we only have 1 set finish for someone who is ready to do the swap asap so you can post pictures and give you're reviews on the mount brackets remember it bolts directly to the b13/b14 chassis same b13/14 mount will be used with the brackets so be sure to have polyurethane insert I will get a pic of brackets to you guys here. And we finished our b14 with the same mount kit we made

Sent from my MB886 using Tapatalk


finally we have a price to work with, whats the price and could you say how quickly they'ld be available
2014-02-10 02:35:50
#287
Here is a link for the video on the vq b13/14 swap kit everyone pls view and comment. We Woking on the price I'll let you guys know has soon as possible .......

Sent from my MB886 using Tapatalk
2014-02-12 16:42:11
#288
Originally Posted by brownspeed
Here is a link for the video on the vq b13/14 swap kit everyone pls view and comment. We Woking on the price I'll let you guys know has soon as possible .......

Sent from my MB886 using Tapatalk


Well i know i will be buying a set from you.
2014-02-18 18:13:28
#289
I will also set aside some funds for these mounts.
2014-02-19 22:00:58
#290
Re: We need a VQ35 swap kit for the B13/B14 and P11 chassis!!!
Hey guys

Sent from my MB886 using Tapatalk
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top