Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: We need a VQ35 swap kit for the B13/B14 and P11 chassis!!!

+ Reply To Thread
Posts: 331-340 of 407
2014-03-04 23:34:57
#331
Re: We need a VQ35 swap kit for the B13/B14 and P11 chassis!!!
Originally Posted by nizmosis
Looking good, I'm looking forward to the finish project.
What will u b using for tranny, axels, and hubs?


That combo will be you're Choice..... spec v trans axle maxima hubs rotors

Sent from my Motorola Electrify using Tapatalk 2
2014-03-06 21:56:26
#332
Nice, so no need of custom axels(length), just normal spec v axels? How about wiring harness n Ecu?
2014-03-09 04:08:10
#333
Re: We need a VQ35 swap kit for the B13/B14 and P11 chassis!!!
Originally Posted by nizmosis
Nice, so no need of custom axels(length), just normal spec v axels? How about wiring harness n Ecu?

Just the hubs you will need to take care of .

Sent from my Motorola Electrify using Tapatalk 2
2014-03-10 04:22:05
#334
maybe someone will produce a PnP wiring harness if there is enough guys that are gonna do this swap.
I would think best option would be a EMS but that's just me.

not sure if there is a much easier way.
2014-03-10 04:23:57
#335
^^ there is a much easier way (if you have to pass a plug in inspection anyway)

Nistune is finally producing a board for 4th gen maxima ecus... Stay tuned

Sent from my SAMSUNG-SGH-I317 using Tapatalk
2014-03-10 04:32:23
#336
so if its not hard to combine maxima harness with b13/14 then nistune would be a great setup. passing inspection im sure most guys will need that.
2014-03-10 05:04:14
#337
Its not hard... I'll have a write up when I finish my p10 over the summer

Sent from my SAMSUNG-SGH-I317 using Tapatalk
2014-03-11 21:15:34
#338
If you are using Maxima Ecu's wouldn't UpRev be a viable solution?
2014-03-11 21:24:25
#339
It would if you were actually to use a 5th gen or newer vq35 ecu... but 4th gen can be so simple.

I did a bunch of research into uprev when I was first planning this swap amd ended up ruling it out for aome reason... the details escape me right now but I knowthere was something about it I didn't love.

Sent from my SAMSUNG-SGH-I317 using Tapatalk
Last edited by ny5speed on 2014-03-11 at 21-28-48.
2014-03-11 22:12:59
#340
My brother. Used uprev. On a spec v he did with the vq swap and he managed. To pull 250hp to the wheel. The setup we have in the 200sx is drive by wire 350z ecu uprev tuned not finished. I let u see dyno video.

Sent from my LGMS500 using Tapatalk
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top