Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Autech GTi -SR20DE UPDATES

+ Reply To Thread
Posts: 121-130 of 130
2012-04-06 16:44:56
#121
love it lil frank
2012-04-07 02:08:13
#122
Originally Posted by jagy
Did you read it? I did said nothing about JWT/Nissan Motorsports cams. I was talking about Nismo cams, no rebranded JWT cams sold by Nissan Motorsports USA. It has nothing to do with Japan Nismo cams.... got it?


Calm down.

Measurements over attitude would be more useful.
2012-04-07 03:27:18
#123
good to see someone putting some love on a DE... especially because the tq curve doesn't compare to most of the stock VE's out there when it comes to whp-tq comparo.

keep it up bro... it would be sweet to see a 250whp DE rappin VE's really hard and then driving it home
2012-04-07 16:36:49
#124
Originally Posted by SR20-AUTECH
Cheers dude, would like to hear more about that ITB DE setup and management.

With the Tri-Y, when modified and routed this way, Primary 1 and 4 end up being slightly shorter by around 2-3" i believe.

The big tube Tri-y header has stepped primaries that are 1.75",1.875", 2.0" O.D.

The secondaries are 2.1".



Thanks for the sizes. Also, did you merge 1&2 and 3&4 or did u do the regular 1&4 and 2&3 pairing?


Sure I'll drop you a pm with my email if you want to discuss the DE itb setup.
2012-04-10 12:59:43
#125
the pairing is 1&2 then 3&4
2012-04-10 13:11:04
#126
Originally Posted by mera
the pairing is 1&2 then 3&4


Do you think it will affect it much if 1&2 are longer than 3&4 and they are paired that way?

aka:

Lets assume 1&2 are similar length and 3&4 are similar length, would you pair them that way or rather pair say 1&3 and then 2&4 to get one long and one short primary together?
2012-04-11 12:16:19
#127
Yeah as said, its paired 1&2, 3&4.

I dont imagine 2" is going to make too much difference. Its not perfect, but as close as i could get.
2012-06-16 18:02:06
#128
So i finally got around to modifying my Mazworx header, so it now has 10" shorter primaries and a smaller choke diameter.

Here is what i ended up with:






*I have also recently changed over to a VE head on this car. I'll start a new thread in the VVL section soon once the car is running.
2012-06-16 18:06:58
#129
what cams in the vvl head?
2012-06-16 18:22:23
#130
Blood, i got hold of a 16VE motor, so i'll be using the stock 16VE cams and also 16VE pistons.

Edit: Follow my VE head swap here:- http://www.sr20-forum.com/vvl/59845-high-comp-16ve-headswap-motor-dynod.html
Last edited by SR20-AUTECH on 2012-07-10 at 19-50-34.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top