Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Injectors

+ Reply To Thread
Posts: 11-20 of 23
2010-02-01 19:11:29
#11
Originally Posted by jen36
man were did all the noobs come from?? wtf. all the regular bolt ons on a sr20 will not require you to change anything.


Cams too?
2010-02-01 19:23:45
#12
Cams too.
2010-02-01 19:24:32
#13
My DE has all boltons and stock injectors stock FP, I'm at 167whp and injectors aren't an issue, id say when u pass the 175+ mark id go with 333 injectors
2010-02-02 18:39:43
#14
Originally Posted by NissanGuy
My DE has all boltons and stock injectors stock FP, I'm at 167whp and injectors aren't an issue, id say when u pass the 175+ mark id go with 333 injectors


One thing to keep in mind, if you live in cold climate - when it the temps drop, you're making more power than 70+ deg F.

My bolt-on NA dyno:
@ 87 deg F, 29% humidity, 1012mb atm pressure
162.4whp, 4.52v peak MAF, 83.4% peak injector duty cycle
Recently in single digit temps it hit 96% peak injector duty cycle.
2010-02-02 18:51:15
#15
Originally Posted by xCONWRATHx
Once again, a crafty spammer.


Good eye! No one reported it...
2010-02-02 18:59:30
#16
G
Originally Posted by jp314
One thing to keep in mind, if you live in cold climate - when it the temps drop, you're making more power than 70+ deg F.

My bolt-on NA dyno:
@ 87 deg F, 29% humidity, 1012mb atm pressure
162.4whp, 4.52v peak MAF, 83.4% peak injector duty cycle
Recently in single digit temps it hit 96% peak injector duty cycle.


I'm in south florida so we don't see temps below 70 too often(allthought when it was cold as hell here the was was moooooooovin)
2010-02-02 19:41:03
#17
Originally Posted by jp314
One thing to keep in mind, if you live in cold climate - when it the temps drop, you're making more power than 70+ deg F.

My bolt-on NA dyno:
@ 87 deg F, 29% humidity, 1012mb atm pressure
162.4whp, 4.52v peak MAF, 83.4% peak injector duty cycle
Recently in single digit temps it hit 96% peak injector duty cycle.


Are you at stock fuel pressure Josh?
2010-02-03 18:22:23
#18
Originally Posted by xCONWRATHx
Are you at stock fuel pressure Josh?

Yes, stock fuel system - pump, fpr, injectors.
2010-02-04 07:00:56
#19
i'm running 333cc and stock fuel pressure
2010-02-05 18:18:49
#20
Originally Posted by jen36
man were did all the noobs come from?? wtf. all the regular bolt ons on a sr20 will not require you to change anything. Like stated before unless your turbo or on the bottle theres no point...


man, now i'm afraid to ask question x( haha lol
oh well i'll just ask you guys instead of making mistakes..
i saw a subaru legacy and the junk yard it was wrecked but when i pop the hood the engine is still fine and i saw some people upgrading their injectors using subaru's injector. anyways i check online what kind of injectors are those then i found out that it's 850cc injectors.. now i'm wondering what can i do with this kinds of injectors??
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top