Join Date: 2007-12-12 Location: Washington State Posts: 942 Trader Score: 9 (100%)
Bone stock it took eternity for me to reach 125. No way in hell it would reach 160 with those mods on flat ground. Even if he could it would take so f'in long what would be the point?
I ran the same thing in cartest and a B13 sentra needs ~180whp to reach 160mph. No way he is making that power at that rpm with those mods. Now the only other way is if he was drafting someone. Even then that car would need to run 160 anyway.
0 Likes
Be the first to like this post.
91 Nissan Sentra SE-R: KYB AGX's, eibachs, prothane mounts, ES suspension bushings, addco RSB, FSTB/RSTB, CAI, JWT C2, UR UDP
Best ET: 13.57 @ 99mph
Maybe he found a straight away that was going downhill reallllly steep, and then let off and put it neutral at 130 and then let it coast to 160....? hahahahaha!
A fully bolted stock cammed DE will do 140mph on the speedo. It takes awhile. A VE with N1 cams will hit the trip reset peg. 160mph is impossible in a stock cammed DE. Unless you are going down a 5% grade.
0 Likes
Be the first to like this post.
2007 Tundra limited- tow unit
2000 4Runner 4x4
1992 Sentra SE-R
1991 Sentra SE-R track car
And you guys are not in the U.S.A., so I don't know what your speed limits happen to be. However, I would bet that you are engaged in a seriously illegal and dangerous as hell quest to find your top-speed on a public highway/freeway.
If you were located in the U.S.A. I would have reported this thread for street racing. Whether in a single vehicle or not, you are in effect "racing" doing a top speed run on public roads.
At those speeds, any problem with the vehicle or the road and you are a dead man.