Thread: Ga16de with 2.0 ecu/ injectors

+ Reply To Thread

First

Last

Posts: 31-40 of 71

Search Thread

2009-07-10 10:15:13

#31

Perry

I LOVE POWER!!!!

Join Date: 2009-01-12
Location: GRENADA W.I.
Posts: 306
Trader Score: 0 (0%)

Originally Posted by Topdog781

So your saying that the ga needs to be tuned to use the sr throttle body? I was told it would be fine with the stock ga ecu. Who is right here?

no it just bolt up & run right away...

0 Likes

Be the first to like this post.

Reply Reply With Quote

2009-07-10 10:49:24

#32

Perry

I LOVE POWER!!!!

Join Date: 2009-01-12
Location: GRENADA W.I.
Posts: 306
Trader Score: 0 (0%)

ga16de mods

ok guys here my setup.....sr20de tb on ga16de but u must port the ga16 manifold for more flow.........i mean right way the tb sitting... u just have to open it up some more...... the car revs faster........i remove my auto tranny & move to 1.5 manual tranny which would give me more power through my gears (for the 1/4) i have proof....i leave sr20de and go.....gt20valve also........most of them.........ngk bkr 6 work best i fine.....17 deg timing.....heres a little trick to the maf... the ga16de maf has 3 wire......strip the two outer wire & put a resistor across them...resistor (orange orange red with gold band) that make the car more responsive......it revs really good.........also add a direct round from battery to the head...... thats was my set up.......i move to sr20de now which i turboed & running strong

0 Likes

Be the first to like this post.

Reply Reply With Quote

2009-07-10 13:03:14

#33

MR-4Door-SR20DET Online/offline status of MR-4Door-SR20DET is unknown

Weekend Warrior

Join Date: 2007-12-11
Location: GA
Posts: 6,377
Trader Score: 43 (100%)

Originally Posted by gtswrx

SR20 ECU, MAF & Injectors with some JWT GA cams and you are set

^With a lightweight flywheel, pulleys, advanced timing, CAI, stock clutch kit will do fine, and a header! This would be a nice little GA!

Originally Posted by Perry

^Nice.

0 Likes

Be the first to like this post.

Originally Posted by SR20GTi-R

NA is a thinking man's game, alot of people dont have the stomach to play NA.

Reply Reply With Quote

2009-07-10 13:10:14

#34

Autech

Nismo Super GT

Join Date: 2008-01-30
Location: Sydney Australia
Posts: 520
Trader Score: 0 (0%)

Originally Posted by alfsentra

The ecu is chipped by me and the member Payu create the first tune BIN, now i have a new BIN setup tuned by me. I have a USDM GA with EGR deleted, sr20 TB, ECU and injectors. Now i have a custom muffler shop 2.25" exhaust with ebay 4-2-1 header and now the car lose traccion on WOT about 3,000 - 3,500 rpm's. My next mod is about the head, maybe full P&P first, work on the exhaust ports with very carefully and create my N/A cams design 272' / 400". I need good time with the head because this is the horrible part about the GA... For the future mods maybe increase the CR to 12.0:1, create my custom launch control, maybe custom header etc...

Old news i done this about 4 years ago

If you want any parts, or spare cams etc let me know - i have some gear here left!

0 Likes

Be the first to like this post.

Reply Reply With Quote

2009-07-10 13:24:24

#35

MR-4Door-SR20DET Online/offline status of MR-4Door-SR20DET is unknown

Weekend Warrior

Join Date: 2007-12-11
Location: GA
Posts: 6,377
Trader Score: 43 (100%)

Originally Posted by Autech

Old news i done this about 4 years ago

If you want any parts, or spare cams etc let me know - i have some gear here left!

^What are the specs of the cams you used, vs the OEM cams. It might be old, but it's still good to have on this forum. The GA16 don't get much love over here.

0 Likes

Be the first to like this post.

Originally Posted by SR20GTi-R

NA is a thinking man's game, alot of people dont have the stomach to play NA.

Reply Reply With Quote

2009-07-10 13:51:59

#36

alfsentra

AR MotorPRO

Join Date: 2007-12-12
Location: Puerto Rico
Posts: 380
Trader Score: 5 (100%)

About the GA with all motor setup my friend put 163.2whp on GA16DS, this engine is carburated and come with 93hp at the flywheel. The setup is:
- P&P head. (No flow test)
- Twin 40/40 mikuni carbs.
- Custom regrind cams. (i think is 280' / 350")
- Other engine pistons. (12.0:1 CR) Nissan CA16DE pistons.
- Custom 4-2-1 header, design by a local mechanical.
- 2" exhaust. (He change the exhaust for 2.25" but never dynoed this.)
- 13lbs flywheel.
The problem with this setup is the tune, he have problems with the distributor, he can't tune the timing correct and the carbs not support the same a/f tune...
Video: YouTube - GA16DS con 163.2 hp

0 Likes

Be the first to like this post.

Reply Reply With Quote

2009-07-10 15:12:05

#37

jagy

Member

Join Date: 2007-12-23
Location: Czech republic
Posts: 2,428
Trader Score: 11 (100%)

160whp is a lot! I read somewhere owner destroyed a few engines. Is the car still running?

Btw. aftermarket distributor didnt help?

0 Likes

Be the first to like this post.

Reply Reply With Quote

2009-07-10 15:18:53

#38

alfsentra

AR MotorPRO

Join Date: 2007-12-12
Location: Puerto Rico
Posts: 380
Trader Score: 5 (100%)

Yep, 2 years to 8.2k and still alive!!! He have MSD 6a with blaster coil because the OEM vacuum distributor is bad for tune and not work fine for the setup. He have use parts and custom DIY parts, nothing special...

0 Likes

Be the first to like this post.

Reply Reply With Quote

2009-07-10 15:25:38

#39

jagy

Member

Join Date: 2007-12-23
Location: Czech republic
Posts: 2,428
Trader Score: 11 (100%)

More info please - engine pics, how carburators mounted to head, CA16 pistons just drop in or need modding, any 1/4 mile times etc. etc.