Thread: what can i do with my sr20de? sorry im new :(

hey guys im from australia and i have a datsun1200 (b110) which im currently putting a sr20de in atm. the sr20de is out of a s13 silvia (silver top sr)and the only work that has been done is the factory computer has been chipped (not sure how). whats my best options for cheap power? advancing timing? i will have custom headers and intake. what cam can i go with the chipped factory computers and when changing the cams what else has to be changed with them. thanx guys im sure u have had this b4

basic bolt ons intake/header/exhaust then get your self a tune ecu either jwt or calum.
thats just for starters.

dont forget upgraded suspension (hypercos/agx) fstb's, lightweight flywheels, s3 cams - the list goes on and on.

Best option for cheap power is advancing timing. Lightweight flywheel for quicker engine response. Lightweight/underdrive pulleys also help in that area.

If youre going to change the cams then go with either JWT S3 or S4 for straight drop in. There are also the BC stage 2 or stage 3 but you will need valve springs and retainers plus cam gears and tuning. There are other cam makers like jun and tomei. I just dont have any info on those.

http://www.sr20-forum.com/all-motor/40-newbs-basic-na-tuning-guide.html

Read and come back with questions.

Open up your ECU casing and have a look at the chip on it, (it should be a board kinda plugged into the main board). See if you can see a brand/name on it. PLMS developments or Bad Biki are the more common boards in AU. If so, drive to your local tuning place, and get them to do a retune. $300 for a couple of hours tuning and you should see a good improvement over the stock tune. This also allows you to get the most of anyt modifications you make too.

Have a look at my build thread on the pulsar forums if you're interested in keeping it N/A
Vumnoo's N/A sr20de build up (on the cheap) PICS - Pulsar Group of Australia

He doesn't have a b13/b14 chasis so no hyperco for him unless they make them for his car. Maybe just s3 like you said and etc.