Thread: ins and outs b13 maf

i cant find anything here or the old forum, just wondering the ins and outs to the stock maf?? trying to set my safc

Got your PM. Not sure what you're looking for. Wiring I assume? Someone else would be of more help. I've never installed a SAFC and know little about the MAF wiring (don't run a MAF anymore and never had to deal with them).

it's already wired up, my N60 maf blew and i need to install the stock one but it wont idle because the ins and outs on the safc are out of whack

stock maf- set it to 6in 6out

I have always wondered why one posts to a thread and proceeds to explain to the originator that he does not have an answer and doesn't know how to help.

Make sure that your set to hot wire and 6in 6out like Cory stated. You can also go to sensor check to make sure that your maf is putting out the correct voltage. If you do not have a wideband, I highly suggest not to mess with the corrections more than 2%.

i has a wideband, car is working perfect now, i did the 6in and out and it drove fine then i got my hands on another N60 and set it up again, thank you all for your help