Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: New 14point7 Do-It-Yourself 2 Wideband Controller

+ Reply To Thread
Posts: 1-2 of 2
2011-06-19 21:53:45
#1
New 14point7 Do-It-Yourself 2 Wideband Controller


Acadiana Sports Car Orphanage is proud to carry 14point7's brand new SLC DIY 2 Wideband O2 controller system


With the DIY 2 unit, some assembly is required in relation to building your own cabling, as well as mounting and connecting the functional circuitry into the controller case.
Some soldering will be required for attaching the cables to the circuitboard connections and a few other minor items.

However, the SLC DIY 2 does far more than log air/fuel ratios. It is fully capable of logging:

  • Air/Fuel Ratio
  • O2 Sensor Temperature
  • Built-in RPM pickup
  • Boost/Vacuum (With optional sensor)
  • Exhaust Gas Temperature (With optional sensor)
  • Intake Air Temperature (With optional sensor)
  • Fluid Temperature (With optional sensor)
  • Fuel Pressure (With optional sensor)
  • Oil Pressure (With optional sensor)
  • Battery Voltage
  • Built in Dual Axis Accelerometer for accel/decel and cornering G-force.
  • Two additional 0-5v analog inputs

With these brand new sensory input features, more functionality changes were implemented to help you get the most out of your new wideband system.
An LED display that can rotate between almost all of the optional sensor readings (when purchased seperately and installed) allows you to keep
track of everything through the display box.

Other Features include:
  • Real Time Datalogging at 25 samples/second
  • Programmable Narrowband Output
  • Programmable Linear Output
  • USB Connectivity (No silly USB-to-serial converters necessary)

Compared with the Techedge 2Y Series of DIY widebands, the SLC DIY 2 offers a more complete, cost effective package:
  • Built in Display - Techedge requires an additional purchase
  • Cables and cable componentry are included with purchase - Techedge requires additional purchases
  • SLC DIY 2 Components come pre-soldered and are benchtested/calibrated before sale - Techedge cannot do this
  • SLC DIY 2 offers native USB connectivity
  • SLC DIY comes with a full, unrestricted version of Winlog for datalogging.
  • SLC DIY has more inputs for more sensors than does the Techedge 2Y series units.

The 14point7 SLC DIY 2 Wideband Controller Kit includes:
  • Circuitboard with all components pre-soldered
  • Controller case and hardware
  • Lambda Cable components - 8ft of 6 conductor 18AWG cable, O2 connector & pins, 6 position molex male/female connector with pins
  • Power Cable components - 4ft of 4 conductor 18AWG cable, 4 position molex male/female connectors with pins
  • Auxiliary Cable #1 components - 8ft of 8 conductor 22AWG cable, 8 position molex male/female connectors with pins
  • Auxiliary Cable #2 components - 8ft of 5 conductor 20AWG cable, solders directly to board
  • 2x Fuse Holders
  • 2x 250ma Fuses
  • 2x 5A Fuses
  • 3ft USB Cable
  • 1 Mild Steel O2 Bung
  • Software CD (Includes a full and unrestricted version of Winlog - a $30USD value)

The SLC DIY 2 wideband system is available from our website at Welcome to the Acadiana Sports Car Orphanage! | Acadiana Sports Car Orphanage - Official Store for $144.95 with free shipping within the US.
O2 & additional sensors cost extra and can be added at the time of purchase.

Thanks!
Zack
2011-06-20 00:21:09
#2
That deal is insanely cheap!!!!

Thank you for the other one, still haven't installed it but it sure looks purdy.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top