Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Convention Marketplace

+ Reply To Thread
Posts: 51-59 of 59
2015-03-23 17:59:58
#51
Originally Posted by LOUROK
@hammerin hank

@Wheelz would like to know if these seats are still available?

Originally Posted by hammerin
I have P10 black leather seats (converted to use in B13/14). The driver's side is on NX rails that have been further modded to an even lower stance. They sit the same height as a stock B14 SE-L seat. I also have the P10 60/40 split bench for rear. The rears are stock P10.
























Let me know if you're interested and I pack them up.


They are not, they are with the new owner. At the ride home of 2014 Convention, I believe the exchange was made. @speedricer
2015-03-23 18:06:19
#52
Yeah he dropped em off at my house on his way back home. Already in my 200sx
2015-03-23 21:52:26
#53
Originally Posted by turbotank
I have a vrs stainless 2.5" tubing kit if anyone is interested 150$

Sent from my 831C using Tapatalk


is this still available?
2015-03-24 02:04:22
#54
It is
2015-03-24 02:09:47
#55
Where are you located? I'm assuming yours is for a 2 door? I have a 4 door..are they the same?
2015-03-24 02:10:53
#56
I'm in Columbus Ohio. It was bought for a 200sx. It still may fit your car
2015-03-24 02:13:59
#57
Can any of the gurus chime in on this?
2015-03-24 02:27:51
#58
The only difference would be the length of the center pipe. And since its a you build it pipe kit it doesn't matter really. Your going to be cutting and welding it anyways.
2015-03-24 02:37:10
#59
I made a new thread for this year's shenanigans

http://www.sr20-forum.com/2015-national-convention-winchester-va-june-17-21/77293-2015-convention-marketplace.html#post1016608
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top