Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Convention swap meet thread

+ Reply To Thread
Posts: 21-30 of 52
2013-06-02 23:41:35
#21
Any one bringing B14 wheels i need some 15's for my SER.
2013-06-03 00:27:32
#22
Originally Posted by eggman
I have a few big Items that I dont want to ship,that I could bring to the convention if they are paid for in advance,or you will pay in cash while there.(so I dont load up un necessary stuff)...make me a reasonable offer via PM and I will load it up!

-Brand new never painted or installed OEM Nissan USDM rear bumper for 91-94 Sentra
-(2)B13 fiberglass fenders...ricer style with vents on the side ,some minor damage ...cheap!!
-Crossmembers ,I have 4
-Shift linkages...I have 3 sets
-(2) 93-94 B13 SE-R USDM front bumpers...One white,one red.Both have 626 lips on them already.The red bumper is in better condition,but the lip is installed half assed(not by me).The white one has the lip installed much better(not installed by me either.)
-White used rear bumper from 92 se-r
-Primer(was dark red underneath) SE-R trunk complete with 92 inner tails and spoiler
-(4) nice nx wheels w/centercaps(bad tires)
-(4) 91-94 SE-R wheels"deli-slicers" with bad tires no centercaps .These were rattlecanned copper color by someone,very badly so they need to be refinished,but no curbage or bends
-100% stock NX2000 catback,from 83,000 mile rust free FL car.
-SR20VE stock exhaust header primary and heat shield.
-JDM highport intake mani without EGR stuff
-91-92 SE-R rear seats top and bottom.need cleaning,but no tears
-B13/NX2000 stock rear swaybar
-B14 ST rear swaybar
-B14 SE-R complete rear beam for disc swap.Calipers,pads,rotors,etc
-NX 1600 5spd trans,unknown miles....shorter gearing than regular 1.6 tranny.
-98 GA16DE 5 spd trans from a 200sx with less than 100,000 miles.Thing still shifts like new.
-B14 Gearset with LSD.No case,needs 2nd gear synchro,it will scratch going from 1-2 if you shift too fast.Otherwise it has no popout or other issues.LSD is pretty fresh,too.


jay how much for the gear set
2013-06-03 01:40:13
#23
Originally Posted by Ncook90
Any one bringing B14 wheels i need some 15's for my SER.


ill bring a set, rims are pretty mint but need tires
2013-06-03 03:10:52
#24
I wont be attending, but I can probably send my parts down with someone.

O2 Induction Intake Manifold
Air to water intercooler setup
Large Heat exchanger for A2w setup
STI injectors
Turbo Compressor In/Outlets
TBolts
Silicone Couplers
Thule Short roof adapter
Yakima Bike Rack
Last edited by blairellis on 2013-06-03 at 03-12-02.
2013-06-03 03:17:07
#25
Originally Posted by patinthehat
Originally Posted by eggman
I have a few big Items that I dont want to ship,that I could bring to the convention if they are paid for in advance,or you will pay in cash while there.(so I dont load up un necessary stuff)...make me a reasonable offer via PM and I will load it up!

-Brand new never painted or installed OEM Nissan USDM rear bumper for 91-94 Sentra
-(2)B13 fiberglass fenders...ricer style with vents on the side ,some minor damage ...cheap!!
-Crossmembers ,I have 4
-Shift linkages...I have 3 sets
-(2) 93-94 B13 SE-R USDM front bumpers...One white,one red.Both have 626 lips on them already.The red bumper is in better condition,but the lip is installed half assed(not by me).The white one has the lip installed much better(not installed by me either.)
-White used rear bumper from 92 se-r
-Primer(was dark red underneath) SE-R trunk complete with 92 inner tails and spoiler
-(4) nice nx wheels w/centercaps(bad tires)
-(4) 91-94 SE-R wheels"deli-slicers" with bad tires no centercaps .These were rattlecanned copper color by someone,very badly so they need to be refinished,but no curbage or bends
-100% stock NX2000 catback,from 83,000 mile rust free FL car.
-SR20VE stock exhaust header primary and heat shield.
-JDM highport intake mani without EGR stuff
-91-92 SE-R rear seats top and bottom.need cleaning,but no tears
-B13/NX2000 stock rear swaybar
-B14 ST rear swaybar
-B14 SE-R complete rear beam for disc swap.Calipers,pads,rotors,etc
-NX 1600 5spd trans,unknown miles....shorter gearing than regular 1.6 tranny.
-98 GA16DE 5 spd trans from a 200sx with less than 100,000 miles.Thing still shifts like new.
-B14 Gearset with LSD.No case,needs 2nd gear synchro,it will scratch going from 1-2 if you shift too fast.Otherwise it has no popout or other issues.LSD is pretty fresh,too.


jay how much for the gear set


100 bucks for the gearset
2013-06-03 03:24:12
#26
sold. throw em in your truck!
2013-06-03 03:29:13
#27
Anyone going to have oem B15 and oem B13 driver side axles? I dont feel i'll get lucky and find any tomorrow when i go to the junkyards to look....
2013-06-03 03:39:36
#28
Originally Posted by patinthehat
sold. throw em in your truck!


Done. you wanna paypal me or pay cash?
2013-06-03 03:40:57
#29
ill just bring ya cash.
2013-06-03 17:03:41
#30
Re: Convention swap meet thread
Also I have some n60 mafs ill bring if anybody needs one.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top