Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 2013 Convention Build Status

+ Reply To Thread
Posts: 111-120 of 165
2013-05-20 02:10:10
#111
Re: 2013 Convention Build Status
Waiting on Nemu sa and a fuel line set in the tank . I have tentatively scheduled dyno time for next weekend. Cross fingers everything goes well on startup

Sent from my EVO using Tapatalk 2
2013-05-20 02:58:25
#112
waiting on a 10mm tap (should be here tomorrow), SS clutch line, and input shaft seal
2013-05-20 18:30:59
#113
Now that I got the 72 chevelle with the lq9 swap to start I can finish the check list on my car. Still need to change the oil and put in new plugs. Then I will be checking some hardware to make sure nothing has come loose since my car is a vibration machine.
2013-05-20 22:56:10
#114
Originally Posted by cortrim1
Now that I got the 72 chevelle with the lq9 swap to start I can finish the check list on my car. Still need to change the oil and put in new plugs. Then I will be checking some hardware to make sure nothing has come loose since my car is a vibration machine.


Lmao, mine is too. Found a lower mount bolt loose yesterday.
2013-05-21 00:05:50
#115
Front brake pads and rotors are on. I took all the measurements I needed and took a ride to bed in the brakes. I only have the front tires left to do and I'll be good to go.
2013-05-21 15:30:08
#116
I dont think the drag car is going to make it.
no truck or trailer.
The daily driver will make track day for sure.
2013-05-21 22:39:45
#117
2013-05-25 15:59:00
#118
Tire place is open until 1 PM on Saturdays. Except they are closed this weekend. I had no idea Monday was a holiday... Ugh.
I guess I'll get the tires on next week. =/
2013-05-28 00:15:00
#119
2013-05-28 00:27:32
#120
spec-v axle is stuck half way into the transmission....
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top