Thread: Convention Build Status

Hurry up. Still need to make a trip to CT.

I just have to get a pigtail for the lightning maf, and just waiting on couplers and a new base map. Hopefully it will be running this week.

Damn jamie, you have a lot of work to do. Atleast the motors done.

Work In Process.....but sure to put a smack down on any west coast haters.....

[img][IMG]http://i531.photobucket.com/albums/dd354/MADTEC/PULSAR%20GTI-R/boostedlawnmower.jpg[/img][/IMG]

Damn, send me a text and remind me to send it tonight. My memory is gone.

It is just a bunch of little work. The intake manifold and putting the gear stack together are the two things I am concerned about.

Everything else should go together pretty quickly.

The Ashton killer

The other......interior shot

[img][IMG]http://i531.photobucket.com/albums/dd354/MADTEC/PULSAR%20GTI-R/IMAG0236.jpg[/img][/IMG]

Well somewhat. After a cam swap, it slowly began to loose pressure on the drive home and the valve cover gasket was torn on install. I popped the valve cover, swapped gaskets for a new set, then ended up finding a few small pieces of shop towel (the blue colored heavy duty papertowel) in the head by the valve springs. I am hopping a small piece didnt somehow clog one of the oil ports .

So I am going to drop the oil pan to see if the pickup is blocked and if not, not certain where to go from there.............

my B15 won't make it.

Engine is still on the stand and about to head out.

X2. Is that a Honda mower with veetack?

CSK's giving me fits. I should have two (2) pairs of working fronts in the next two weeks. Yes, two pairs. Reminds me I have to call Truechoice today and see if they received my mangled Koni's.

Due to the Koni-fiasco, not going to have time/money to get my CF trunk/hood goodness painted and installed in time. Maybe I'll just have naked CF installed by me....? Although that is a bit flashy for my conservative aesthetic tastes.

Get the CSK's back in two weeks or so and properly installed. Install a couple rear interior quarter panels and then detail it. It won't be done, but it will be ready enough.

Bringing my bolted-on DE to whip some ass at the drag strip.

im done and ready to go Maybe add one more thing to up the boost we shall see

Hitting the track this wednesday/next couple weeks and shaking down everything

Hopefully tune it with the jamaican on the dyno sometime before or the cow pastures of ohio will do.

J if you need to help you know who to call