Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Parts market

+ Reply To Thread
Posts: 1-10 of 48
2011-08-02 14:47:56
#1
Parts market
I am going to take a little liberty here in that you wouldn't post in this thread unless you were:

1.) Coming to the Convention
2.) Well known amongst your peers

In other words, these will be cash transactions face to face so there is little chance of funny business. That being said I will keep a close eye on this to be sure it doesn't get out of control. Please post if you are looking for something to buy or have something that you would be willing to bring. No shipping, like I said earlier face to face transactions only.
2011-08-02 14:55:42
#2
I will start with the following items I'm looking to bring if there is any interest:

- Progress adjustable front sway bar for B13
- O.E.M. control arms - likely the only set that fits correctly because the "jig" was my NX
- new in packaging NX trim pieces for under the hatch (all the fabric pieces)

In addition I have boxes of NX pieces so if you are looking for something let me know and I'll be glad to bring it.
2011-08-02 15:38:23
#3
Looking for an inexpensive header/ exaust for the new dd ve project i am working on.. thanks
2011-08-02 16:21:02
#4
I've got a 2.5" Stainless Exhaust for a b13 that I can bring... Unfortunately From the Rear Control arm back its 2.25" I believe, but its all stainless. Was on my VE B13 ran great with it... I went with a 3"...
Also got an ST Rear Sway for a b13
Random Gauges
NX 3 Pillar Pod
NX1600 Center Console
2 Slate or whatever NX Grey T-Tops
NX Tails
POwer NX Door Panels w/ Switches
S13 SE Wheels/Tires

OMG please mention something... I've got a ton of crap I've hoarded over the years.
2011-08-02 17:20:45
#5
I am looking for an iac for a ve.
2011-08-02 17:26:28
#6
Originally Posted by XxToKeSxX
I've got a 2.5" Stainless Exhaust for a b13 that I can bring... Unfortunately From the Rear Control arm back its 2.25" I believe, but its all stainless. Was on my VE B13 ran great with it... I went with a 3"...
Also got an ST Rear Sway for a b13
Random Gauges
NX 3 Pillar Pod
NX1600 Center Console
2 Slate or whatever NX Grey T-Tops
NX Tails
POwer NX Door Panels w/ Switches
S13 SE Wheels/Tires

OMG please mention something... I've got a ton of crap I've hoarded over the years.


please pm me on the price for the exhaust..
thanks
2011-08-02 20:18:39
#7
i have a set of brackets to make NX calipers fit larger 11"+ rotors with rotors and pads used.
front right and left stock b13 ser calipers with braided lines with rotors and axxis pads used.
let me know if there worth bringing
2011-08-02 21:09:06
#8
I can bring up my ASP budget header if anyone is intrested, Im looking to buy some turbo goodies if anything catches my eye also.
2011-08-02 22:59:35
#9
i will be bringing up a 18g turbo setup that was on my brothers cars most likely if anyone is looking for that type of stuff. made good power on the dyno in ct before the clutch started to slip.
2011-08-03 01:22:40
#10
Alex, you need to get at me for that 18g.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top