Thread: Post Your B14 Pictures (Not So Silent)

Get your beam bent at the next beam bending party if they are still going on and that will fix it, another option is to switch it with another beam since it's a pretty easy swap. I had a 95 SE that would wear the back tires out constantly because of the negative camber and it was lowered just under an inch, never had a problem with any of my other B14's it's rare but it happens...

I actualy have another b14 rear beam that came with the car when i bought it. I was told it was bent but the seller had no proof so I never went through the trouble of swapping it out is there any way to tell if a beam is bent if its off the car?

^Those are from the summer. I had to get a picture with the intercooler in there.

Figured I'd add a few I took in poughkeepsie the other day.

they were prolly gonna swap it because of the same camber issue you have, I have no idea how to tell the difference, but Steve Foltz could tell you if he bent it, contact him I don't know his name on here but it was 98SR20VE on the other forums...

hmmm i might just go ahead and swap it i never noticed excessive tire wear or anything though so i cant really say the beam on my car is bad.

/Game over

here is a real bad cell phone pic..(i couldn't resist)lol the car is real dirty btw..

my b14....

1995 Nissan b14 SER Stock VVL only the Header