Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Crankshaft Position Sensor problem please help

+ Reply To Thread
Posts: 1-2 of 2
2014-05-02 01:11:50
#1
Crankshaft Position Sensor problem please help
I own a 1995 200sx se-R
In 06 I pulled the tranny to replace broken clutch release lever. Shortly after I moved and the car sat pulled apart for a couple years. The tranny is back in and car is running but without the crankshaft sensor. It will not go all the way in. I can hear it hitting metal and it still has around 1/8" left until its in all the way. I believe it is hitting the flywheel.?
When the tranny was out I didnt do anything with the clutch or flywheel and the sensor is the same one that has always been in there. Does anyone know what the problem might be? I dont know why it wont go in now. I have been looking online trying to get any information that will help but have had no luck. Any help is appreciated and very much needed.
2014-05-02 03:11:02
#2
What's weird is that the p10 crank sensor sits out about the same amount because its longer than the b14 sensor. If i recall correctly the sensor is mounted in a slighty different place.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top