Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: New to forum.need help

+ Reply To Thread
Posts: 1-10 of 14
2012-07-06 23:44:22
#1
New to forum.need help
Hi! So i recently bought a mind condition 96 200sx ser with a 99 sr20de engine swap. 5 speed. not really sure how to tune out this engine/car so i need help. btw i do have a whole turbo kit lying around that goes with the car, so i plan on doing that last. what should i start with?
I appreciate it, thanks!
2012-07-06 23:48:03
#2
I am sorry but I really do not understand what you are asking for.

How to tune? What ECU does the car have?

What kind of mind condition does it or you have? Or did you mean MINT condition?

Welcome to the forum, sir!
Last edited by Kyle on 2012-07-06 at 23-48-28.
2012-07-06 23:49:00
#3
it has a jwt obd2 ecu. it's an sr20de engine, and i mean interior,and body wise mint condition.
2012-07-06 23:51:32
#4
The JWT ECU is not tune-able. It is a pre-tuned ECU.

If it needs reprogrammed, you must contact JWT, send it in and they will re-flash it for $100 plus shipping.
2012-07-06 23:52:54
#5
so what are my options? what should i do if it's a none tuneable ecu?
2012-07-06 23:55:43
#6
I would sell it and buy a NEMU ECU and Nismotronic software to compliment the ECU.

There is a vendor section JKTUNING. I knoew very little about tuning, sorry I cannot help you.
Last edited by Kyle on 2012-07-06 at 23-56-33.
2012-07-06 23:56:27
#7
ok. but the guy who sold me the car, said something along the lines of " the ecu is for the turbo" lol.
2012-07-06 23:57:23
#8
Originally Posted by betz
ok. but the guy who sold me the car, said something along the lines of " the ecu is for the turbo" lol.


If the ECU is still in the car, remove it and check the label. If you are still unclear, remove the cover for the ECU, remove the screws for the daughterboard, write down or take a picture of the label with a serial number on it, send that to JWT and they will tell you what that ECU is written for.
2012-07-07 00:00:19
#9
Install ecu, install turbo, install tires. The END.
2012-07-07 03:37:36
#10
the ecu is not in the car. I just have it on hand. the previous owner installed the sr20de and everything seems to be working. he said it was for the turbo? but regardless, do they make sr20det's for FWD?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top