Thread: Need info on transmission mount

went to all local part stores and none of em carry/cant order the transmission mount that goes on the cross member.

Anyone know any newer models that have same mount?? Or any stores online that might have em? ive looked em up and havnt found any sites with the mount for manual with 2.0 only been able to find is automatic or 1.6... or are the mounts the same on either drivetrains?

i did see some polyurethane inserts on ebay... can anyone tell me how hard they are to install and if there any good?
like this kit....
Prothane 14-1901 MOTOR MOUNT INSERT KIT Nissan 1.6/2.0 Ltr 200SX/SENTRA/NX | eBay

i did a lil seachin but either the photos was missin or not really any good info so if anyone could help out without the flaming it b nice... just sucks havin my front end all jacked up and not bein able to drive cuz a mount is bad and caused me to break my bolts off -_-

~Fuzzy

A lot of people go with Prothanes, but they are a little difficult to install; since you have to take out the metal sleeve in the mount in order to press the prothanes in.

The OEM mount can be had from any, 91-99 SE-R.
Some have gotten them from Rockauto.

---
I've heard people say the 1.6L mount is different but I would say otherwise...
I have a 1.6 and a 2.0, I used the same prothanes in both mounts.

I would go out to say the 1.6 and 2.0 transmission mounts are the same as long as they are manual tansmissions. The auto mount is smaller though.

http://www.sr20-forum.com/suspension-brakes-tech/14833-how-prothane-motor-mounts.html

thanks ill just order the Prothanes then as long as the link is the correct ones. im sure they will last longer then oem if i decide to autox next year with it when i get her completed

~Fuzzy

Those are good. you'll do fine