Thread: NX digital cluster in a B14

well i want to know what need to be done to put a NX 2000 Digital cluster in my 200sx

any info will be great thanks

Well speed sensor needs to be changed in tranney. Pretty much you have to get a wiring diagram for the nx1600..the digi cluster does NOT come in a nx2000, only the 1600. You need to get the diagram for the nx1600, and a 200sx, and just run the wires and run the 1600 speed sensor, and there ya go. Its alot of work, but looks great.

ok thats sound good, so will i need to get the speed sensor from the nx1600 and will it fit on my GA16 tranny?

B14 speed sensor can be used for the NX digital cluster.

Readreadreadreadreadread:


http://www.sr20-forum.com/audio-electronics/38323-digital-gauge-cluster-info.html

Same goes for the B14. Take note of the part covering the speed sensors!

So so so so so very wrong. It can be used, but it shows the wrong speed. Read before you post things about stuff. It will read like 90 mph when your going 40 mph.

^this..

Wiring and figuring everything took me like 4 hours total.

Swag has done it, and a great job before. Its better to listen to people who have A. done it before, and B. researched on doing it before, than C. someone who tells you the wrong info that hasnt read shit about it.

Im sorry alex, its just when people post that dont know about something and give the wrong info, thats when people get fucked over and get grudges against people on here. You need to read up about stuff and be sure you know the answer before you post man. You could of fucked him over pretty good if no one else posted and he thought he could use the stock speed sensor. He would have to run more wires and shit. Its just not good. I dont mean it to sound like me being a asshole, but im just trying to show you.

^Dan makes a good point. Reasearch is key on everything. I honestly do more reading here thank talking.

I can also tell you how to make the digital readout more white and bright, or have to change it from white to green without spending a dime. I can tell you how to wire in cruise control into the cluster too.

Good looking out



you are 100% right



swag i deff want to know how to change the color to green since my b14 is green

and thank you for all the info, it really helps