Thread: rebuild

My car recently turned over 200,000 so its time to give it some love...I've got new front wheel bearings and hubs , new lower control arms, new inner and outer tie rod ends and new raxles.... ... Is there anything else that I need or should replace while I'm doing all this?? Sway bars ?

Steering rack bushings. Sway bar bushings and end links. If you use ES parts, it will give you a better feel. How are the struts and upper bearings?

if it hasnt had a tuneup/stage 0 in a while i would do that. also a fuel filter, and seafoam treatment. check/replace spark plugs. trans fluid flush. thats all normal stuff.

but as far as front end stuff like your doing, the ^old guy, named the rest.

I would check the front and rear main seals to see how they are, they are prone to leaking after a while especially on a motor with that many miles. It also wouldnt hurt to get a new valve cover gasket and distrbutor o ring. Again those are also gaskets that are prone to leaking and are cheap to replace. Other than that ^ what those guys said.

while your at it upgrade to the Z32 Fuel filter. If you have the OEM axles, id like to buy them from ya.