Thread: Looking for a new front bumper cover....

I've looked at so many of these.....I'd really like an autech, but good luck with that.

I've been looking at the covers for the g20's, and I actually like the m1

Looks like it might work with factory foglights.

But, I also like the stock one for this 2001?


I would really like something that will fit my intercooler better, and hang just a little lower than my stock bumper cover. I just don't want something that looks ridiculous. I've also seen a lip on some members' cars, but I'm still not sure where to get it. This one here:


Any advice on what more options I might have based on what I've shown?

That's a Stillen lip. And P11 covers fit but require a bit of trimming on the sides.

How much is a "bit"? lol... Where do they need to be trimmed exactly? Just curious before I go and get one. Just like to know what I'm up against.

The Stillen lip looks cool, but that still leaves me with no additional room to work with. Thanks for the info on it though.

You will need to trim both wheel arches of the P11 bumper to get the bumper to fit.

Do you know about how much needs to be trimmed? Sounds like you would trim to shape, and maybe use a heat gun to re-roll the inside edge? Or is it not quite that simple?

Tried searching for a post that shows it, but found nothing.

Project: P11 Bumper on a B14 - SR20 Forum

http://www.sr20-forum.com/members-rides/2491-crash-b14-p11-bumper-conversion-new-pics-2.html#post44761

here is another

the stillen lip adds about a half inch to an inch below the stock bumper. ive seen some huge front mounts stuffed in there. They still sell brand new on stillen.com.

Getting the stillen lip isn't going to help with intercooler fitment you would still have to cut the bumper.

Yah but it COVERS where you cut the bottom of the bumper so it looks good, instead of god awful.