Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: What Did You Do To Your B14 Today?

+ Reply To Thread
Posts: 2,521-2,530 of 2,656
2014-01-15 00:14:48
#2521
Replaced my front O2 sensor from and extended OEM to an O2 from a Maxima. Wire was the perfect length to reach the O2 housing, wish I did this when I first did the swap.
Then some how I passed inspection with no monitors ready. No complaints with that though.
2014-01-24 23:42:22
#2522
picked up some nx spindles and if all goes well new bearings pressed in today. next few weeks tires and alignment and new egr gasket. then hopefully ad22vf upgrade and lower...
2014-01-25 04:29:13
#2523
cleaned it almost all the way out but pretty much how im going to be running it at the track and it weighed in at 2500lbs on the dot, not too shabby for full interior!
2014-01-27 05:45:13
#2524
Bhg!
2014-01-30 17:41:25
#2525
looked at it

made me
2014-01-30 22:54:23
#2526
Finally got the correct ECU installed in the "$900 Nissan 200SX SE-R with a catch" - it's a '96 and someone had installed a '98+ automatic 1.6 ECU which ran the car alright, but threw a laundry-list of CEL codes. Seems to be good after a beat-run. Car's running a lot better now too, it always had a stutter under certain loads and RPMs. Red-lined it for the first time too, as it would misfire above 5,500RPM with the old [wrong] ECU - presumably not knowing what to do! No CEL but will have to put some miles on her to make sure it doesn't have any legitimate codes.


2014-02-08 23:59:09
#2527
Some retrofit projectors and some HID's. Turned out pretty good for the first time. May do a write up when I get some time.



2014-02-09 07:26:18
#2528
Re: What Did You Do To Your B14 Today?
Yeah, where's that write up! Lol. Looks good. Any snags, tips...etc. Looks like I gotta order some now =P
2014-02-09 07:54:09
#2529
Originally Posted by blckse-r
Some retrofit projectors and some HID's. Turned out pretty good for the first time. May do a write up when I get some time.





Yeah, please do a write up. That would be awesome. Looks good man.
2014-02-09 16:22:59
#2530
Originally Posted by speedricer
Yeah, where's that write up! Lol. Looks good. Any snags, tips...etc. Looks like I gotta order some now =P


Thanks guys. Yeah, everything went pretty smooth. I will try to do a write up this week sometime, look out for it. I have loads of pics. I did learn a couple things that I would apply if I did it again that I can share then.

EDIT: I do see there is a how to for this already, should I still do a new one??

The only snag was the right projector didn't tighten down as good as left one did. Should be okay. And that it was a little harder to align properly with my semi-sloped driveway and single door garage door.
Last edited by blckse-r on 2014-02-09 at 17-19-49.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top