Thread: Need Swap Guru Advice: Engine Harness and ECU Differences 1995 vs. 1997 200sx B14

I will be swapping a JDM high port motor w/ a 96 G20 ECU and modified '97 engine harness (resistor fix in place) into a 1995 SE-R. Since I'll be dealing with ODB I vs. ODB II, will I need to make any modifications on the '95 to the secondary harness that attaches to the rear O2 sensor, any other harness or other items to make this work? I was thinking that the resistor fix would be the only thing (which is already done) but I wanted to be sure.

Thanks!

Nah bro it's a direct swap

95 200sx is obd2

direct swap... only the 98 and 99s require the harness mods. see how to section on jim wolfs site for the wireing..

Thanks!