Thread: 97-98 2oosx

hey i have a 97 sentra gxe 1.6l .. and i just got a sr20de from a 98 200sx i also got tranny and computer ,wire harness from the 98 .. will the harness an computer work for me ??????

yeah it will, but you'll need a crossmember, axles, motor mounts, and probably some other stuff.

so like haveing the harness and computer from th 98 i wont have to do any wiering than? but yea i got all the motor mounts and the crossmember i have everything i strip thre 98 down lol.. but i was asking cuz i was told dat the 98 harness and compu wasent gona work but thanks bud !!

Your going to need a 95-97 ser harness because the 98 ser harness won't connect to your 97 underdash. But otherwise everything should work out. Look under your dash at the connectors that attach the engine harness to the dash. If the small connector is a 4 pin and the other 2 are 16 pin you will need the 95-97. If it's an 8 pin for the small one and 20 for the large one (i think the third one is 20 pins too) you won't need to get the other harness. I basically just did this swap in my 96 and you need a lot more stuff than you think so make sure you have everything before you start. The computer should work fine but if you don't want to wire anything check those connectors and get back to me. If you need anything else just ask.