Thread: 6UL wheels

any one running the 949 Racing 6UL wheels on their B14?
size tire are you running? also can you post pics plz.

thanks,
Mark

Chill is. Hes running 225's

^Tire height? Spacers? Stock or Aftermarket studs?

^^^^^
No spacers needed on a B14. I was running 225/45/15 Toyo Proxes R1R on some Enkei RPF1 15x7s. Stock lug studs.

I've been running some 6UL's for about a year.

15x8 nickel finish:

1. I've been running a 215/45/15 toyo t1r on these. It give the tire a slightly stretched look. (not a very good tire IMO)

2. I'm running stock studs. I do not have spacers. I do not rub at all. Although clearance from the front tire sidewall to the strut is pretty close.

3. If I switch to a a 225/45/15 later, I'm probably going to have to get a small spacer to keep the tire from rubbing, as the toyo's I'm currently using run on the small side.

4. The 15x8's I have come in about 12.5 lbs. each. I had to order them in advance, and wait a few months for them to come in.

5. Nice thing is, I haven't seen one car be it miata or nissan or honda that has these wheels around town.

-bryan

thanks. what is your suspension set-up?

anyone got pics? i wanna how they look on the B14

^shyit looks nasty I wanna go wide aswell. I hate seeing my wheels sittin under my chassis

For the 6UL's, the hub bore is 59.1?



^D*mn your ride is bunkin" man! +rep......