Thread: car wont start... help!

okay so i have a 96 se-r that i am starting to turbo and i put 370cc injectors in and a z32 maf soldered in by my bro. i got a calum computer from a forum member tuned for the 370s and z32.

when i install the calum computer i turn the key to the on position and my rpm gauge flickers to about 2k and back down to zero, fan kicks on for a half a second and shuts back off and i dont hear my fuel pump kick on at all. so i dont know if this computer is junk or im just doing something wrong.

after i tried the calum and it didnt fire up i put my stock ecu back in to make sure my fuel pump isnt the problem and it isnt. kicks right on like it should. cranks but doesnt fire probably due to the z32 being installed.

I was wondering if I just got a safc II and switched the maf setting to 2 IN and 6 Out from what I researched(not 100% sure) that I could start my car with my stock ecu and the z32?

Any advice would be greatly appreciated because I am so right now!