Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: B14 Rear Beam Problem UPDATED FIXED

+ Reply To Thread
Posts: 21-24 of 24
2009-02-05 17:56:56
#21
ugg another 100 bucks for me to spend before the track day. Thanks for figuring this out I never would have on my own, far too lazy.
2009-02-05 20:33:59
#22
Can I ask exactly what the problem was, that led you to replace the assy?

Reason I ask, is because it seems as if my beam has shifted in it's entirety to the right side of the car, by about 1". The wheel on the pass. side is more flush with the body, whereas the left wheel is recessed about 1" into the wheel well. Seems off center by .5" or a little more.
2009-02-22 02:00:07
#23
So let me understand this, you got Nissan OEM parts, the large piece the connects the beam to the body and new bushings for under $100?
2009-02-22 03:44:55
#24
Originally Posted by TeKKiE
Can I ask exactly what the problem was, that led you to replace the assy?

Reason I ask, is because it seems as if my beam has shifted in it's entirety to the right side of the car, by about 1". The wheel on the pass. side is more flush with the body, whereas the left wheel is recessed about 1" into the wheel well. Seems off center by .5" or a little more.


yes that exactly and it would not cushion when i went over big bumps the car would dig in to the passenger side,
The car lost all of its rear end capabilties when these bushings are shot. Once replaced it feels like new , nice and tight.

Originally Posted by Viprdude
So let me understand this, you got Nissan OEM parts, the large piece the connects the beam to the body and new bushings for under $100?


Yes the complete assembly from NIssan for under $100
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top