Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: ve or ebay header?

+ Reply To Thread
Posts: 11-19 of 19
2013-04-11 21:04:12
#11
Originally Posted by Kariba
So you're saying the stock VE header you have does not include the mid-pipe?


Usually no, and if it does I think it's very restrictive compared to the mid pipe from the knock offs they sell off ebay which are 2,5" I believe.
2013-04-12 04:35:21
#12
Any of you who have posted here about ebay header better than stock 20ve header has ever dynoed both?

Peace
2013-04-12 07:41:26
#13
Originally Posted by niZmo
Any of you who have posted here about ebay header better than stock 20ve header has ever dynoed both?

Peace


If you have and want to share the results in favor of the stock VE manifold, please!
2013-04-12 15:17:12
#14
Originally Posted by gtswrx
Originally Posted by niZmo
Any of you who have posted here about ebay header better than stock 20ve header has ever dynoed both?

Peace


If you have and want to share the results in favor of the stock VE manifold, please!


+1
2013-04-12 15:23:12
#15
Originally Posted by niZmo
Any of you who have posted here about ebay header better than stock 20ve header has ever dynoed both?

Peace


You're kinda just throwing stones in this thread. Not really helpful but that's you're choice.

OP etc. ; Yes he's saying people have made good results with a stock VE manifold and a nice custom secondary pipe. I've even read people claim that the Fujitsubo header primaries are just a replica of the stock cast manifold. They do look similar if you line them up next to eachother.

I've had good results with the 2.5" SSAC header and its a lot easier for most people in North America.
2013-04-12 22:09:09
#16
I have dynoed with the stock ve stuff because I was borrowing it for a while back in the day. When I switched over to the ssauto 2.25 I gained 2hp but tq stayed the same. My friend had a 20v header with 3" downpipe and n1 cams, he went to stock ve primary with custom 2.5 secondary and hit low 190's vs high 190's. The power peaked earlier than the 20v header tho. Don't ask me for the dyno because that was like 4 years ago.
2013-04-13 04:55:01
#17
Originally Posted by Benito
Originally Posted by niZmo
Any of you who have posted here about ebay header better than stock 20ve header has ever dynoed both?

Peace


You're kinda just throwing stones in this thread. Not really helpful but that's you're choice.

OP etc. ; Yes he's saying people have made good results with a stock VE manifold and a nice custom secondary pipe. I've even read people claim that the Fujitsubo header primaries are just a replica of the stock cast manifold. They do look similar if you line them up next to eachother.

I've had good results with the 2.5" SSAC header and its a lot easier for most people in North America.


My first post here as it relates to the question/topic - I said 20ve header. The post you quoted was only my 2nd post. And by asking questions, how am I throwing stones? It's either you have the answer or you dont.

The SSAC header is probably more readily accessible to you US guys. Also because you get the motors without downpipe so instead of making one you go SSAC/ebay header. Nothing is wrong with that. My experience has shown me that the stock sr20ve complete exhaust manifold is better than 'stock' 2.5" eBay header.

Peace
2013-04-22 15:43:08
#18
Hey guys can you link me to the Ebay headers you have purchased? There's eleventy billion listings and I don't want to waste money on a crappy one. I checked SSAC's site, and it seems to be outdated. Any help is appreciated! Thanks!
2013-04-23 01:56:26
#19
Nissan Sentra Ser 200SX Infiniti G20 2 0L SR20DE Stainless Exhaust Header Gasket | eBay
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top