Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: VE w/ aeromtive FPR anyone? Chime in Please

+ Reply To Thread
Posts: 21-23 of 23
2013-04-13 02:19:55
I will be using a FPR fitting kit from summit racing 6AN to 8mm barb that would allow me to use the stock size 5/16 or 8mm high pressure fuel hoses Here's the links

http://www.summitracing.com/parts/tbs-ts-0402-1110 THIS ITEM WAS CANCLED DUE TO BACK ORDER
Plus one more fitting
An to Barbed Fitting Adaptor 6 An to 8mm Silver | eBay GOT 3 MORE OF THESE SO 4 total
5/16 High Pressure Fuel Hose
Godspeed Aluminum Top Feed High Flow Fuel Injector Rail s13 sr20 SR20DET Silvia | eBay
And For the Feed side of the fuel rail this.
Fragola 496317-BL Female 90 Degree Tube Style Coupler -6AN Black 2 of these and a 6an PLUG Fittng
Last edited by klassickrican on 2013-04-16 at 05-47-30.
2013-04-14 19:26:17
I'm not sure it is compatable, but I will try to make it work..
just waiting on injectors now..:numbness:
Last edited by klassickrican on 2013-04-14 at 19-27-33.
2013-04-16 06:30:46
ok injectors and some of the fittings came in so my attempt to make it work Begins.

I purchased a CS AICV adapter from a OG forum member that came in handy and with a little modification, it worked great.
(made a notch)

I removed the O ring on the bottom side of the injector and put the one that came with the new fuel rail and it fit snug right into the ve rubber gromet. it can be seen in the pic above

The return side 6an- 90deg fitting comes pretty close to the throttle wheel but it will work just fine

The feed side

The middle Tab on the fuel rail worked perfect..Just test fitting this.. I need to cut and shorten one of the long spacer's that comes with the fuel rail kit

This was the best spot for me to put the FPR

This also came in.
Last edited by klassickrican on 2013-04-16 at 06-32-47.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top