Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Klassickricans's VE-T Build

+ Reply To Thread
Posts: 121-130 of 212
2013-05-21 18:37:44
#121
Looking good bro. I've been running that same coil for maybe five years or more and never had a problem. You'll be ok.
When you get the extra cash the COP will be a good upgrade though.
Last edited by kevwal on 2013-05-21 at 21-51-10.
2013-05-21 19:17:23
#122
Originally Posted by kevwal
Looking good bro. I've been running that same coil for maybe five years or more and never had a problem. You'll be ok.
When you get the extra cash the CAS will be a good upgrade though.


You mean like a 20v cop and cas setup?
2013-05-21 19:50:09
#123
Originally Posted by kevwal
Looking good bro. I've been running that same coil for maybe five years or more and never had a problem. You'll be ok.
When you get the extra cash the CAS will be a good upgrade

I see what you meant. .
Last edited by Re-spect on 2013-05-21 at 19-51-49.
2013-05-21 20:11:51
#124
Dom I run the same coil as well. I upgraded the stock ignition after I had some break up over 18psi. I am using a digital 6a box with the blaster coil. So far no issues other than the stupid msd plug adapter for the dizzy. I will be going cop when I have the money to do so. Its not cheap when you factor in the 20v valve cover. I did figure out to modify the msd plug adapter so it could not come loose. I will make a cable with the correct ends sooner or later.
Last edited by cortrim1 on 2013-05-21 at 20-21-58.
2013-05-21 21:37:00
#125
[/QUOTE]

You mean like a 20v cop and cas setup?[/QUOTE]

That or the pencil coils that everyone is using with the Maxworx hall sensor but you will need a standalone for that I believe.
I ran as much as 25psi with the blaster ss coil on my car with the MSD box with no breaking up.
2013-05-21 23:52:23
#126
@kev yeah im running AEM series2.
Anyone know how much hp can the 20v coil/cas can hold?
Im thinking of getting the 20v setup friday.yes or no?
2013-05-22 00:33:29
#127
You have many options with the series2. I'm not sure on how much power they can handle. Maybe you can PM one of the CT guys, i'm sure they can answer your questions.
2013-05-24 03:49:34
#128
had the day off due to rain.I got some work done on the Drag car and finally finished it up...Emailed tuner to get a tune session going lets see....



A little vid after sartup
M4H06723 Video by chinky864 | Photobucket

All that's left is a tune and wait on mazworx to send me the new Revised 6spd swap motor mount..
Then off to the track for a shake down..
Last edited by klassickrican on 2013-05-24 at 03-59-23.
2013-05-24 05:09:35
#129
Stupid question, but how did you wire up your VVL solenoids? Sorry
2013-05-24 10:35:35
#130
@klassick where did you get your aem series 2 from? I want to go stand alone as well.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top