nuts missing from under rear main seal housing?
I have a question, i thought my rear main was leaking so i ripped the gearbox off. Seal is fine, not one bit of oil but there are signs of oil.
When i looked through the flywheel i noticed these two bolts were sitting there un-nutted. Have a feeling because of where they are it really doens't make a difference but figured i'd double check, the dust cover from the upper sump has the nuts, but this doesn't.
Talking about the 2 studs at the bottom of this pic, but on the ve they bolt into the upper sump and are closer together
http://i94.photobucket.com/albums/l97/habibi_01/008-5.jpg
When i looked through the flywheel i noticed these two bolts were sitting there un-nutted. Have a feeling because of where they are it really doens't make a difference but figured i'd double check, the dust cover from the upper sump has the nuts, but this doesn't.
Talking about the 2 studs at the bottom of this pic, but on the ve they bolt into the upper sump and are closer together
http://i94.photobucket.com/albums/l97/habibi_01/008-5.jpg
Last edited by naedtrax
on 2012-09-29
at 03-06-50.