Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: SR20VE harness, im a little lost here

+ Reply To Thread
Posts: 1-8 of 8
2012-07-14 16:51:27
#1
SR20VE harness, im a little lost here
Hi guys so yesterday i got a SR20VE engine with ECU and Harness, the issue is that when we pulled out the old harness from my 200sx SER OBD2, all the inside plugs were diferent. Can someone help me to see what i need to do to swap this thing using the stock SR20VE harness?

I have read that this is just a drop in swap... but now i see its not that, im a little lost here...

2012-07-14 18:28:00
#2
Put back in your old harness and convert to odb1 step down harness and run Nismo tronic or get a Nistune Type 4 board for your 200sx SE-R ecu. Run a external switch tune it and call it a day. Stock VE redlines @ like 7200. It also kicks the VVL really late almost close to the revlimit.
2012-07-17 02:57:18
#3
Its a drop in swap, nobody told you to use VE Harness and ECU
2012-07-20 14:52:37
#4
Hey here is the setup i will be running with the SR20VE:
-SSAC Header
-Decat
-3" Exhaust
-3" WAI with K&N Filter, J60 MAF
-Aeromotive FPR at 48psi w/ Z32 Fuel Filter
-Nistune ECU tunned at dyno.
-XTD 11 lbs flywheel with ACT Clutch
-Gspec Pulleys (crank and WP)

How much should i expect? i was thinking in 175 or 178whp, any opinions about this?
2012-07-20 16:55:30
#5
Depends on the motor, it could be 168 or 184.
2012-07-20 19:43:31
#6
Originally Posted by CR
Hey here is the setup i will be running with the SR20VE:
-SSAC Header
-Decat
-3" Exhaust
-3" WAI with K&N Filter, J60 MAF
-Aeromotive FPR at 48psi w/ Z32 Fuel Filter
-Nistune ECU tunned at dyno.
-XTD 11 lbs flywheel with ACT Clutch
-Gspec Pulleys (crank and WP)

How much should i expect? i was thinking in 175 or 178whp, any opinions about this?

about that
2012-07-20 20:32:48
#7
I did not understood your answers... The engine did good on the compression test... 225 in each cylinder...
2012-07-20 20:55:32
#8
Some motors make more than others. You won't know till u get done with the tune.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top