Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 88mm on a budget!! (Not on budget anymore!!!) New Dyno!!

+ Reply To Thread
Posts: 101-110 of 241
2012-10-16 20:05:53
#101
With 203whp 150ft/lb it ran 13.1 @ 103 with 1.84 60ft and 280lbs driver
Lets see how it runs with the new power and a 130lbs jokey jajajaja
2012-10-16 20:11:02
#102
Originally Posted by Payu
Originally Posted by cory
Ok I see. I thought you made 230s w the zx slugs. Now I see. Good stuff.

No basically the 300zx pistons robbed power instead of making power so basically 88mm build makes 10-12whp and 10ft/lb over a solid SR16VE piston build both on a plenum and N1 cams!! Comparing to Pito's HC 2.0L that makes 228 on that same Dyno..


What is the weight difference between the 4?

CP 88mm 13:1 = ?
CP 86mm 12.5:1 = ?
SR16VE pistons = 430 grams
'91-93' 300zx (VG30D) 88mm = 520 grams
Last edited by MR-4Door-SR20DET on 2012-10-16 at 20-21-50.
2012-10-16 20:12:16
#103
Originally Posted by payu
with 203whp 150ft/lb it ran 13.1 @ 103 with 1.84 60ft and 280lbs driver
Lets see how it runs with the new power and a 130lbs jokey jajajaja


12.8 ??
2012-10-16 20:51:27
#104
Originally Posted by Payu
Yes waiting for Nismotronic update to convert to speed density!!!
And then we can talk about ITB's for sure!!


Will that really work with Nismotronic? If so i will need one!
2012-10-16 21:16:27
#105
Originally Posted by jagy
Originally Posted by Payu
Yes waiting for Nismotronic update to convert to speed density!!!
And then we can talk about ITB's for sure!!


Will that really work with Nismotronic? If so i will need one!


It should!! When they release the new version of tunercode filmware and and nismotronic software!!
2012-10-16 21:41:12
#106
It was time he did not have any good times with those 300zx pistons.
2012-10-16 23:01:27
#107
ITBs will not work with speed density on Nismotronic.

Everything will need to be TPS based.

You guys will be in the 250whp range once you ditch the N1's.

With everything right these 88mm motors will make 275-280whp.
Last edited by SR20GTi-R on 2012-10-16 at 23-05-22.
2012-10-16 23:14:49
#108
Originally Posted by SR20GTi-R
ITBs will not work with speed density on Nismotronic.

Everything will need to be TPS based.

You guys will be in the 250whp range once you ditch the N1's.

With everything right these 88mm motors will make 275-280whp.


What she said!
2012-10-17 01:11:06
#109
Originally Posted by SE-Rawkus
Originally Posted by SR20GTi-R
ITBs will not work with speed density on Nismotronic.

Everything will need to be TPS based.

You guys will be in the 250whp range once you ditch the N1's.

With everything right these 88mm motors will make 275-280whp.


What she said!


i see what u did there

cant wait until the marshtuned product line comes out... i see a near future with 88mm builds being the norm
2012-10-17 03:40:13
#110
Originally Posted by unijabnx2000
Originally Posted by payu
with 203whp 150ft/lb it ran 13.1 @ 103 with 1.84 60ft and 280lbs driver
Lets see how it runs with the new power and a 130lbs jokey jajajaja


12.8 ??


I'd say it should be around 12.3-5@107-9mph with those changes
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top