Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Problems with Greddy MSS , no rpm showing

+ Reply To Thread
Posts: 1-3 of 3
2008-04-20 03:26:18
#1
Problems with Greddy MSS , no rpm showing
I just got done wiring up my MSS and to my dismay I cannot get the RPM's to show up on the MSS. I have tried two different wires for the MSS and neither gave me a reading on the MSS. It powers up and I can go to all the settings but it never shows RPM's.

I know that the wires are correct for the RPM because I have my SAFC hooked up to the exact same ones and it shows RPM.

So did I just get a dead MSS or is it something that I did wrong. I used the sticky to set everything up, and Im sure I have everything set right.

Any input?
2008-04-20 13:20:22
#2
take it off and do it again. everything. if you want that is. double check everything and if it happens again....then iguess it's faulty
2008-04-20 15:30:53
#3
Originally Posted by srpow1117
take it off and do it again. everything. if you want that is. double check everything and if it happens again....then iguess it's faulty


^^^^endorsed^^^^
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top