Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Ve blown head gasket?

+ Reply To Thread
Posts: 1-4 of 4
2012-03-31 20:41:30
#1
Ve blown head gasket?
Installed new jwt ecu with ve 333cc injectors , running hotshot header with 3" exhaust . Had it running for a minute maybe and started smoking white smoke like a sob all of a sudden. shut it off water in cylinder 1. pulled the head and couldnt find anything wrong with the head gasket, looked fine. had the head sent off and its flat and being pressure tested. It was just weird that everything looked fine. Is there anything else it would be? Checked the block couldnt see anything abnormal. Want to double check before buttoning it back up with new vet gasket
2012-03-31 21:56:36
#2
Stock ve head and block? Ever taken apart, or was it running fine before changing injectors and ecu?
2012-03-31 22:14:05
#3
cracked sleeve?
2012-04-01 05:25:25
#4
Ya just a stock ve , and i looked at the block/sleeve all looks good from what i can see. had the de injectors and ecu and it didnt run very well so i got a jwt ecu tuned for the ve with the 333cc injectors hooked up the ecu and about a minute later all hell broke loose
Last edited by dudespencer on 2012-04-01 at 09-20-40.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top