Originally Posted by nismo94tuner Anyone know what clearances should be? Sr20guy is donating his transmission for the cause so me and the Honda man can tear it down to see what we're getting into. Hopefully Saturday!
I have old stacks with 2 teeth of 3rd gear left if they are of any help. Theyre just taking up space in my spare parts tote in the back yard
0 Likes
Be the first to like this post.
95 200sx SE-R: 12.6@106 mods: t25@9psi and a whole lotta traction
98 Altima: daily
Thanks fellas. I appreciate the offer Tom but I'm actually heading to jasons to help him with a trans swap. He is gunna let me take the b14 trans that blew to disect and see what I am getting into. Hopefully works out and I can have the new FD in this weekend!
So I got the gearstacks out along with the diff. Fucking nightmare. Thank god its a practice trans. Idk if I have the balls to do it to mine. So many variables.
Totally easy Bes. Bolts, Ring clip, up and turn 1 inch to the right, remove the small shaft holding the gear in the back, remove the shaft long holding the selector, remove the 3 bolts holding 1 stack, hold both stacks together and wiggle them up.
I wish. Brought the FD down to my buddies shop to see if the old time guy would be interested in at least swapping the gears over and he was like I'm not going to, lol. He referred me to this other shop and said tell them I was sent by him and that they should take care of me. Sucks!
You OD'ed on taking it apart. You didn't have to take out the small mechanism held by the 10mm bolts. If someone reassembles the gear stack i can put the tranny back together in under 5mins