problems with VVL
hello as they are, I expose my problem, install grab SR20VE days on my 200 sx, the problem is this, I have installed a Granatelli swich for the opening of VVL, the detail is that suddenly stops working, and I get to move him to the symbol "S" if it is not the correct way qye horn function, program parameters and opening and closing all good, PSAN few days and just stops working, not whether it be psychological, but after a move you at the time of ignition (distributor) is when it fails,,
As additional information, connect to the VVL power and ground wires to relay VVL remaining land (for a similar connection to the original VVL) red wire to 12v llave.cable Granatelli Ground black and yellow number 3 wire the ecu (tach signal) I hope this is correct or if the connection just made me beyond this fault.
greetings!
As additional information, connect to the VVL power and ground wires to relay VVL remaining land (for a similar connection to the original VVL) red wire to 12v llave.cable Granatelli Ground black and yellow number 3 wire the ecu (tach signal) I hope this is correct or if the connection just made me beyond this fault.
greetings!