Thread: Aftermarket VE Valves

With the lack of availibility from Nissan, especially with exhaust valves, am I the only one out there with no where to turn? A stock replacement or even +1 exhaust would make me

Thoughts, Interest, Rants: Post up here.

Doesnt supertech make valves ? Doesnt faz's 2.4 head from his old motor have oversized valves.

Stratton.

i was going to have supertech grind down there valves but me and dave decided to stick with the stockers text me

They need to start making std and +1mm size exhaust valves and at least SS not iconel to keep prices down.. for most of the community since +2mm + oversize seats and matcing of the head will increase a simple bent valve replacement for most of us...

I have over sized valves in my 2.4 head. They are +1 in, +2 exhaust.

I am finishing up my other big bore head and had similar port work done but I would like to have this head fit with standard valves or +1 on the exhaust.

I know my brother and I will need a set in the coming weeks. No company would be willing to make some? This lack of valves sucks. I wish DE valves fit...

Yes I would deff be interested.

Working something as we speak right now. Hopefully it wont be too bad.

If we go +2 on the intake, that is actually larger than the valve seat itself so the valve wont have nothing to sit on. Probably have to stick with a +1mm intake and a stock or +1mm on the exhaust.

Ferrea Racing Components – High Quality Valves & Valvetrain Components

^Possibility.