Originally Posted by SER96VSPEC Do a search here on the forum. It's either a 68K or 100K resistor IIRC. Instead of using the temp sensor, you will stick each end of the resistor into the plug. Also, make sure you plug and run the solenoid with the appropriate vacuum lines. There are diagrams in the FSM and also I have a couple diagrams posted here or on the old sr20forum.com that show how to hook up the solenoid if you're not running EGR. It's pretty simple.
68K resistor is the one. Make sure the vacuum lines are connected properly. Did this mod on both of my VEs, no EGR light.
0 Likes
Be the first to like this post.
91 SE-R "Betty", VE track car,"The Black Corolla" lol...
94 SE-R "Lucy", VE garage queen, clean & mean...
87 D21 Hardbody King Cab, V6 5sp "Ethel" the daily.
Originally Posted by blusteelsr20 68K resistor is the one. Make sure the vacuum lines are connected properly. Did this mod on both of my VEs, no EGR light.
X2.
0 Likes
Be the first to like this post.
96 SE-R VE goodness, 185whp, 138tq, N1 cams, Nistuned 09 xB the DD, TRD suspension, 2nd gen tC wheels