Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: looken for a N1 sr16ve head

+ Reply To Thread
Posts: 1-10 of 16
2011-10-01 19:39:47
#1
looken for a N1 sr16ve head
got cash in hand

preferably with N1 cams

let me know 8458662092
2011-10-01 20:35:16
#2
Good luck on that.
2011-10-01 20:40:00
#3
http://www.sr20-forum.com/naturally-aspirated/48420-fl-pulsar-vzr-n1-motor-parts.html

this would have been you window of opportunity. good luck getting another, pm andreas and keep your fingers crossed that one is already in his possesion so you can get what you want...
2011-10-02 18:29:53
#4
thanks guys
2011-10-02 18:32:32
#5
haha..good luck..

2011-10-02 19:42:58
#6
Isn't the N1 head just a VE head with N1 cams that's had a skim from the factory? Even if there's more to it than that it will be much easier getting N1 cams and some simple machine work.
2011-10-02 20:13:43
#7
Pretty sure the N1 head came milled and with the casting cleaned up in the ports.
2011-10-02 20:27:51
#8
"The N1 head is the same as the head on the SR16VE and SR20VE engines but it is hand ported and milled about 1mm, decreasing the chamber volume and producing the higher compression ratio."

Source: Amazon.com: How to Build Performance Nissan Sport Compacts, 1991-2006 HP1541: Engine and Suspension Modifications for Nissan Sentra, NX, 200SX, and InfinitiG20. Covers engines GA16DE, SR20DE, QG18DE, and QR25DE. (9781557885418): Sarah Forst: Books@@AMEPARAM@@http://ecx.images-amazon.com/images/I/511RZe9vvwL.@@AMEPARAM@@511RZe9vvwL
2011-10-02 20:46:01
#9
it wouldnt be hard to build a better head from any VE head
2011-10-02 20:50:55
#10
Locki just get N1 cams. I'll then show you what else to do to get the car on point ya spee!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top